Wholesale Only

Dual Port Manometer and Pressure Switch Tester

Tools & Instruments

Fieldpiece – Test Tools HVACR Pros Trust

Field Piece SDMN6 Manometer

Do More with the Pressures You Need with the New Fieldpiece Dual Port Manometer and Pressure Switch Test

  • Gas Pressure
  • Static Pressure
  • Pressure Differential
  • Test Pressure Switches
  • Easily Calibrate any Adjustable Pressure Switch
  • Great for Diagnosing Furnace Performance

Calibrate Adjustable Pressure Switches to Manufacturer Specs

Correct pressure switch operation is integral to the safety of a furnace environment. The SDMN6 is a dual-port manometer that also accurately tests pressure switches by simulating a draft with an internal pump.

The SDMN6 allows you to test pressure switches the right way.

Adjust the pump’s speed to create a negative pressure (vacuum). The red LED indicates when the switch closes. View the closing and opening pressures directly on the LCD.

The dual-port manometer measures ±60 inches of water column, high enough for gas manifold pressures.

Check building pressurization with static pressure resolution of 0.01”WC. View P1-P2 in the bottom line of the display for checking the performance of a blower.

Overview

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers’ specification, so there’s no need to carry a large variety of pressure switches on your truck.

The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60″ water column (WC) with a resolution of 0.1″ WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used: inches of water column, millimeters of water column, mBar, and PSI.

The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired.
In the static pressure mode, the unit can measure up to 2″WC with resolution to 0.010″WC, which enables a technician to measure small differences in air (or static) pressure.

Testing with the SDMN6 Dual Port Manometer and Pressure Switch Tester

Appion TEZ8

Tools & Instruments
Appion TEZ8 8CFM Vacuum Pump

Appion TEZ8 8 CFM Vacuum Pump

TEZ8 — 8 CFM Vacuum Pump with 5-Second Oil Change

Designed from the ground up to make AC/R system evacuations easier and faster than ever before.

Features and Benefits

  • Field-proven to outperform larger, belt-driven pumps by hours or even days
  • 5-Second Oil Change™ – Change the oil on the fly without breaking the vacuum
  • Debris catch tube protects the pump and automatically relieves positive pressure – eliminates accidental oil showers
  • 1/2″ and dual 3/8″ inputs to allow for maximum input flow – up to 32 times the flow of single input pumps
  • Clearly Visible Results – TEZOM™ (Totally EZ Oil Management) cartridge makes it easy to monitor the condition of the oil, and on-the-fly oil changes remove moisture and dirt from the pump
  • Clean & Dry – TEZOM™ oil is engineered to behydrophobic, repelling moisture and dirt for better oil performance
  • Advanced “anti-suckback” eliminates restrictive check valves
  • Durable, all-metal pump construction with light weight, field-duty composite resin case

 

Dimensions and Power
Length 14.25 in.
Height 10.3 in.
Width 9.4 in.
Weight 28 lbs.
Power 115 VAC, 60 Hz, 10 Amps

 

Feature Specifications
Free Air Displacement 8 cfm (227 l/min)
Ultimate Vacuum <20 Microns
Inlet Port Fittings 1/4, 3/8 (x2), 1/2 inch Flare

 

Filter Puller / Pusher

Tools & Instruments

By Sensible Products

Filter Puller / Pusher by Sensible Products

Filter Puller / Pusher by Sensible Products

The Filter Puller / Pusher Is A ‘Must-Have’ Tool for All HVAC Maintenance Technicians!

  • Telescopes from 12 inches to 7 feet
  • Easy to store or carry, it fits comfortably into your toolbox
  • The hook pivots to position a powerful magnet that retrieves dropped hardware from the job site
  • Its long reach and durable construction make the Filter Puller / Pusher the most convenient and reliable way to replace filters in even the largest systems

Veto Pro Pac Cargo Totes

Tools & Instruments
Veto Pro Pac Cargo Totes

Veto Pro Pac Cargo Totes

Veto Pro Pac Cargo Totes

Veto Pro Pac Cargo Totes provide a versatile storage solution for a wide variety of job site situations. They are perfect as a catch-all bag for raiding the van; a carry-all bag for end of day cleanup; and they provide a more efficient way to organize the back of the truck.

  • Bulk storage capacity
  • 4 Exterior vertical pockets
  • 1800 D Nylon Body Fabric
  • Waterproof polypropylene base
  • 5-year limited warranty

CT-LC

Dimensions: 14.5′ H x 13.5′ L x 9.5′ W

CT-XL

Dimensions: 16.5′ H x 17′ L x 9.5′ W

Digimon-SE

Tools & Instruments

Refco Digimon SE 4-way Manifold

Refco Digimon SE 4 - 4 Way Manifold

Refco Digimon SE 4 – 4 Way Manifold

  • 48 Refrigerant tables incl. R410A, R744(CO2), R1234yf
  • Analog- and Digital Display
  • Accuracy: Class 1.0
  • Pressure resolution: 0.01 bar / 0.5psi / 1kPa / 0.001MPa
  • Pressure Gauge from –0,95 bar to +60 bar
  • Direct calculation and display of superheat and subcool
  • 2 precise K-Type temperature sensors
  • Internal and external vacuum sensor
  • Leak-test function
  • Backlit LCD display with multiple protection
  • User-friendly operation
  • Fiber Reinforced ergonomic knobs
  • Automatic power-save mode
  • Low battery indicator
  • Continuous measuring rate
  • Calibratable
  • Optional K-type clamp thermocouple
  • Optional external vacuum sensor

 

The Siege

Tools & Instruments

By Streamlight

Streamlight Seige

Streamlight Seige®

Compact, Alkaline Hand Lantern

Rugged, cordless, alkaline battery-powered lantern provides 360° of soft, even light that illuminates a large area.

  • Multiple modes:
    • White LED (four C4® LEDs) with cover removed:
      • High for brightest light; 340 lumens; runs 30 hours
      • Medium for bright light and longer run times; 175 lumens; runs 70 hours
      • Low provides extended run times for when less light is needed; 33 lumens; runs 295 hours
    • Red LED (one red LED)
      • Red LED High – Steady (night vision preserving mode); 10 lumens; runs 235 hours
      • Flash SOS mode for emergency signaling; 10 lumens; runs 430 hours
      • Night vision preserving mode extends run time for emergency preparedness
  • Polycarbonate glare-reducing cover provides soft, even 360° light distribution; comfortable to use in close quarters without impairing vision; cover is removable to illuminate large areas
  • Stand it upright or to use as an overhead light or hang it with D-ring on base of lantern
  • Incorporated D-rings on top and bottom of lantern – hang in either inverted or upright positions. They are spring-loaded to stow against the light, out of the way when not in use
  • Ergonomic handle designed to lock in upright or stowed position; incorporated hook allows for hanging on horizontal rope, cables and pipes
  • Uses three “D” cell alkaline batteries (sold separately)
  • Keyed battery door facilitates battery replacement in the dark
  • Recessed power button prevents accidental actuation; features battery level indicator
  • Battery level indicator changes from green, to yellow, to red, then to flashing red when batteries reach the end of their useable life
  • Durable, polymer construction with rubber molded base that provides stability on slippery or uneven surfaces
  • IPX7 waterproof to 1m submersion; it floats; 2m impact resistance tested
  • It floats so you can retrieve it if you drop it in the water
  • 7.25 in. (18.41 cm); 1 lb. 15 oz (878.83 grams) with batteries
  • Available in Coyote

Yellow Jacket AccuProbe UV

Tools & Instruments

Yellow Jacket AccuProve UV Leak Detector

AccuProbe UV

Use the electrolyte sensor or UV technology (or both at the same time) to detect HFC, HCFC and HFO refrigerants, including SNAP approved hydrocarbon blends.

The Smart Alarm LED shows how big or small a leak is on a scale of one to nine. With the electrolyte sensor, UV lights and Smart Alarm™ indicator, this is the only tool you need for fast, easy and certain leak detection.

The ultra-sensitive sensor of the YELLOW JACKET AccuProbe UV Handheld Leak Detector allows it to detect even the most difficult to detect R-134a, R-404A, R-407C, R-410A and 1234yf refrigerants. Our exclusive solid electrolyte sensor technology reduces heat and gives the sensor longer life than traditional heated anode or heated diode detectors.

The AccuProbe UV features low, normal and high sensitivity levels with visual and audible signals, and a 3 LED UV light system that works with 395-415nm wavelength leak tracing dyes. The audible alert, which can also be muted, and the flashing visual alarm indicator at the probe end increase in frequency and duration as concentration increases.

The AccuProbe UV is equipped with the advanced digital SmartAlarm LED display. This feature takes the guesswork out of whether or not to repair a small leak. Unlike the more traditional LED bar graphs that copy or mimic the audio alarm signal, the SmartAlarm digital leak size indicator measures, registers and displays the leak size independently from both the audio alarm and sensitivity level on a scale of one to nine:

  • 1 to 3 – less than 0.1 oz./yr.
  • 4 to 6 – 0.1 to 0.5 oz./yr.
  • 7 to 9 – more than 0.5 oz./yr.

Other Features

  • Improved, robust, ergonomic design is easy to use in close areas and extendable into hard-to-reach areas
  • Long life, stable sensor
  • Instantaneous response time
  • Clears in 12 seconds or less after exposure to a 1.75 oz (50 g)/year leak
  • Automatic calibration and reset to environment
  • Low battery indicator
  • Microcontroller technology
  • SAE J2791 Certified, CE Marked, EN 14624
  • 24-month limited warranty
  • Made in the USA