Wholesale Only

Cooper Atkins Temperature Thermistor Instrument

Tools & Instruments

Model SH66A 3-Zone Temperature Instrument

Cooper Atkins SH66A Thermometer

Cooper Atkins SH66A Thermometer

For applications where multiple temperature measurements need to be taken, this is the instrument to use. Measure suction and liquid line temperatures simultaneously, temperatures across condensing coils, as well as the ambient temperature, all at the same time!

The Constant Scan feature records the min/max temperature from three probes allowing the technician to monitor critical temperatures remotely while completing other tasks.

Product Specifications

Probe3 Model 1075 General Purpose Puncture Probe
Probe2 Model 4011 Surface Probe
Probe Model 2010 Air Probe
Certifications WEEE, CE, NIST, RoHS
Auto Shut-off after 10 minutes of non-use
Warranty 5 Year Instrument, 1 Year Probe
Memory Min/Max memory
Zone 3-Zone
Temperature Range -40° to 300°F
Temperature Accuracy ±0.3°F or ±0.5% Reading, whichever is greater
Ambient Temperature Range 0° to 130°F / -18° to 54°C (90% RH non-condensing)
Resolution 0.1°F
Weight 1lb 5oz / 595g
Dimensions 9 1/2″ x 6 1/2″ x 3 1/2″ / 241mm x 165mm x 89mm
Battery Type Battery 9v
Battery Life 90 hours

Limited time offer only $215.00

RESCUE Motors

General Info

There are many imitations but only one Rescue®

The Ultimate Truck Stock Motor™

US Motors Rescue Motors

US Motors Rescue Motors

Think of them as service call assurance.

  • Now you’ll always have a motor when you need it.
  • RESCUE motors replace a variety of different horsepower applications.
  • Using RESCUE motors will eliminate the need for temporary substitutions, extra driving time to get the right motor, and reduce the need for emergency openings in the evening.
  • You may not know what kind of motor you will need, but with RESCUE motors on hand,you know you’ll have one that will work.

Direct Drive Blower Motors and Condenser Fan Motors

  • Horsepower: 1/12–3/4 HP
  • Speeds Offered: 825 or 1075 RPM
  • Rated Voltages: 115, 208–230 or 460 Volts
  • Enclosures: Condensers: TEAO, Blower: OAO
  • Motor Type: PSC (Permanent Split Capacitor)

Download brochure and specifications

Rectorseal Mighty Pump

New Products, Plumbing

Quickly & Completely Clear Slime Blockage in Seconds!

No Nitrogen Tank or Gas Cartridges Needed!

Rectorseal Mighty Pump

Rectorseal Mighty Pump

  • Clean out A/C condensate drain lines
  • Drain standing water from A/C condensate & overflow pans
  • Remove standing water from water heater overflow pans

Using the Mighty Pump is the easy way to clear blocked A/C condensate drain lines without nitrogen, gas cartridges or electricity. Quickly clears slime, mold and dirt plugs out of primary and secondary drain lines.

This lightweight, reversible, hand-operated pump generates enough pressure or suction to clear blocked lines from inside or outside a home or building. It can also be used to empty standing water from condensate pans, overflow pans, water heater pans, tubs and toilets.

Flexible inlet and outlet hoses connect to standard condensate drain lines (a 3/4″ adapter is also included.) Two spring check valves permit 2-way flow but prevent backflow. The pump can be cleaned easily by flushing it with clean water.

$59.00 while supplies last!

Veto Pro Pac Tech LC HVAC

New Products, Tools & Instruments

The TECH-LC is a HVAC service technician version of the original Model LC. A number of changes have been made to tailor the bag to accommodate HVAC service technicians’ tools and work routines. The TECH-LC sports 53 pockets with ample pocket room for hand tools, a parts box(es), meter(s), a cordless impact drill and other bulkier items. 8 new small neoprene pockets have been added for drill bits and bit extensions.

Veto Pro Pac Tech LC

Veto Pro Pac Tech LC

PRODUCT SPECIFICATIONS:

  • Width: 9.5”
  • Length: 13.5”
  • Height: 12” (Handle Folded Down)
  • Weight (empty):  9 lbs.

MAXIMIZED TOOL STORAGE CAPACITY:

  • Vertical Tool Pockets: 50 inside & 3 outside
  • Flat Zippered Pockets: 4 inside & 2 outside
  • Neoprene Pockets: 2
  • D-Rings: 4 large and 5 small
  • Exterior Electrical Tape Loop: 8” Fabric with Clip Closure
  • Stainless Steel Tape Clip: Yes

RUGGED MATERIALS & CONSTRUCTION:

  • Waterproof Base: 3mm Injection Molded Polypropylene
  • Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
  • Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
  • Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip
  • Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
  • Fold-Back Snaps: 6 zinc, marine grade
  • D-Rings: Powder Coated Steel
  • Rivets: 38 zinc, marine grade rivets
  • Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:

  • Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap with Clip-On connection
  • Warranty: 5 Years (see Veto warranty terms and conditions)

Only $154.95 Limited Time!

RCD Duct Sealants – Adhesives – Weather Barriers

General Info

RCD Products with Doug The Ductwork Detective

Air Ducts Leak. Sealing heating and cooling air ducts with RCD Mastics saves energy and allows central air conditioning units, heat pumps, and furnaces to operate efficiently. RCD Corporation adhesives, caulks, mastics, duct sealants and insulation coatings save energy by sealing leaking sheet metal ductwork, flexible duct and fiberglass ducts. Repairing leaky ductwork and crawl spaces improves indoor air quality and saves electricity. HVAC contractors, mechanical contractors and weatherization contractors depend on RCD water-borne building products.

RCD Mastics save energy by preventing heat gain or loss and provide permanent, air tight, flexible, and weather resistant repairs and installations on HVAC air ducts, thermal insulation, and crawl spaces. RCD adhesives, duct sealants and mastics earn LEED Credits, are low odor, low VOC and easy to use. Sealing leaking air ducts can be a do-it-yourself project. Sealing duct leaks in homes, apartments, offices, hospitals, high rises, government and military buildings improves comfort, indoor air quaility and saves energy.

RCD Mastic # 8

RCD Corporation® #8 Mastic® is a water-borne sheet metal air duct sealant used for permanently sealing the joints and seams of all duct types including UL-181 listed air ducts. RCD Corporation® #8 Mastic® is the best choice for high velocity sheet metal air duct construction used in auditoriums, high rises, hospitals, industrial ventilation systems, large retail stores, malls, military buildings, prisons, schools, sports centers and complexes. It remains flexible and withstands the constant joint movement of these demanding systems.

#8 Mastic® qualifies for LEED Credits; for details click the highlighted Earn LEED Credits link below. Easy application by brush, trowel, palm, spray or extrusion.

  • Water-Borne & Non-Flammable
  • Weather Resistant
  • Contains Ceramic Microspheres
  • Preferred By Professionals Nationwide
  • Earns LEED Credits
  • Elastomeric
  • High Solids Content
  • Easy Application & Clean-up

RCD # 15 Weather Barrier

#15 Weather Barrier Coating® is a bright white, water-borne, multi-purpose coating for protecting air ducts and thermal insulation exposed to the weather. The best choice for preventing degradation and increasing the lifespan of closed cell foam insulation on line sets. As a lagging adhesive it will provide years of flexible service. As a roof coating it reduces the cooling load on commercial and residential buildings which will lower energy costs.

  • Bright White
  • Water-Borne & Non-Flammable
  • Weather & UV Resistant
  • Solar Reflectance Value of 80%
  • Earn LEED Credits
  • Elastomeric
  • Air Duct Coating
  • Easy Application & Clean-up
  • Brush, Roll or Spray

RCD Glasscoat

RCD Corporation’s® Glasscoat® is an inorganic woven fiberglass mesh; coated on one side with pressure sensitive adhesive. Rolls are individually labeled and shrink wrapped. Glasscoat® Adhesive Backed Fiberglass Mesh reinforces adhesives, coatings, mastics, and sealants used in the fabrication and installation of air ducts and thermal insulation. Glasscoat® is also known by several generic descriptions like: fiberglass scrim, fiberglass tape, and fiberglass cloth.

Color White
Width 3"
Length 150′
Cat # 303250

RCD Products Available at all SWH Supply Centers