325-5 with 12A39
NEW! Higher Capacity 325-5 & 325-5L
Maxitrol has upgraded the 325-5 series for 2 psi systems. The new models offer higher capacities while using the same regulator body size as the original 325-5A series. This allows the regulators to be used on a wider range of applications without needing extra space for installation.
The new 325-5 appliance regulators have a capacity of 325,000 Btu/h and replace the 325-5A. The new 325-5L line pressure regulators feature a capacity of up to 600,000 Btu/h and replace the 325-5AL. The new 325-5 and 325-5L will be available September 1, 2013.
The 325-5L series with OPDs, for 5 psi systems, also have a change in model number, but the capacities will remain the same. The 325-5AL48 is now the 325-5L48, and the 325-5AL600 is being replaced by the 325-5L600. These model number changes go into effect September 1st.
NEW Specifications for 325-5
| Gases | Suitable for natural, manufactured, mixed, liquefied petroleum, & LP gas-air mixutures |
| Approvals | ANSI Z21.18 / CSA 6.3 Gas Appliance Pressure Regulators |
| Maximum Inlet Pressure | CSA Certified 2 psi (13.8 kPa), 5 psi (34.5 kPa) |
| Maxitrol Tested 10 psi (69 kPa) | |
| With Vent Limiter 12A39 5 psi (34.5 kPa) – Natural, 2 psi (13.8 kPa) – LP | |
| Minimum Inlet Pressure | CSA Certified 1 psi (6.9 kPa) |
| Emergency Exposure Limits | Inlet side only 65 psi (450 kPa) |
| Maximum Individual Load | Largest single appliance served by the regulator 325,000 Btu/hr |
| Capacity | Total load of multiple appliances combined 325,000 Btu/hr |
| Vent Pipe Connection | 3/8″ NPT |
| Ambient Temperature Limits | -40°F to 205°F (-40°C to 96°C) |