• UV light activated self-adhesive repair patch
• Extremely durable fiberglass reinforced polyester/plastic
• Ideal for use in HVAC/R, plumbing, and a variety of other applications
• Can be drilled, tapped, sanded or painted in less than an hour
• Resistant against many chemicals, solvents and oils
• Flexible and waterproof
• Will not rot or rust temp resistance -40 to 390 degrees
• Fast curing with no shrinkage or expansion after curing
Fluke has now developed FieldSense technology that takes the open-fork, current-measuring functionality of its existing T5 Electrical Tester and adds ac voltage measurements. So now, you can use Fluke tools to take simultaneous voltage and current measurements — not just detection — without test leads.
Introducing the AMPROBE IRC-110, an affordable Point and Shoot Thermal Imaging Camera for the Professional.
The Amprobe IRC-110 thermal camera, designed for the professional, is rugged with point-and-shoot functionality to give yoiu a visual heat map image for quick and accurate identification of temperature related issues. Troubleshoot electrical connections, motors, HVAC and electrical, insulation leaks around buildings to identify potential energy savings.
The versatile 36 Series gas valves cover a wide range of applications. Designed for use with common electronic ignition systems (HSI/DSI), it replaces hundreds of existing models in the field.
White-Rodgers is the leading manufacturer of gas valves to the OEM. When it’s time to replace – replace with the same brand trusted by OEM’s on their equipment!
Horizontal vent kits for use in venting high efficiency fossil fuel appliances.
Available in 2″ & 3″ models
The RESCUE EcoTech motor is an ECM replacement for a PSC blower. Exclusive speed-control technology provides the efficiency of an ECM. Installation is a snap. RESCUE EcoTech drops into existing permanent split capacitor (PSC) direct drive blower applications, without complex wiring modifications or time-consuming changes to system controls.
Electronically Controlled Motor (ECM) technology gives RESCUE EcoTech motors up to 82% efficiency, saving 25% or more of the watts in A/C or heating mode and 75% of the watts in circulation mode. Updated designs are now dual voltage (115/230V) and multi-horsepower, so one size, or at most two, fits all your needs
Maxitrol has upgraded the 325-5 series for 2 psi systems. The new models offer higher capacities while using the same regulator body size as the original 325-5A series. This allows the regulators to be used on a wider range of applications without needing extra space for installation.
The new 325-5 appliance regulators have a capacity of 325,000 Btu/h and replace the 325-5A. The new 325-5L line pressure regulators feature a capacity of up to 600,000 Btu/h and replace the 325-5AL. The new 325-5 and 325-5L will be available September 1, 2013.
The 325-5L series with OPDs, for 5 psi systems, also have a change in model number, but the capacities will remain the same. The 325-5AL48 is now the 325-5L48, and the 325-5AL600 is being replaced by the 325-5L600. These model number changes go into effect September 1st.
|Suitable for natural, manufactured, mixed, liquefied petroleum, & LP gas-air mixutures
|ANSI Z21.18 / CSA 6.3 Gas Appliance Pressure Regulators
|Maximum Inlet Pressure
|CSA Certified 2 psi (13.8 kPa), 5 psi (34.5 kPa)
|Maxitrol Tested 10 psi (69 kPa)
|With Vent Limiter 12A39 5 psi (34.5 kPa) – Natural, 2 psi (13.8 kPa) – LP
|Minimum Inlet Pressure
|CSA Certified 1 psi (6.9 kPa)
|Emergency Exposure Limits
|Inlet side only 65 psi (450 kPa)
|Maximum Individual Load
|Largest single appliance served by the regulator 325,000 Btu/hr
|Total load of multiple appliances combined 325,000 Btu/hr
|Vent Pipe Connection
|Ambient Temperature Limits
|-40°F to 205°F (-40°C to 96°C)