Wholesale Only

Ruud Downflow Gas Furnaces

Heating

Ruud RGLS Value Series Downflow Value-Line 80% Gas Furnace

Ruud RGLS Series Downflow Gas Furnace

The Value Series 80% Downflow Furnace is a value-alternative which enjoys the benefits of high-efficiency at lower cost.

The Ruud Value Series line of downflow gas furnaces is designed for installation in closets, alcoves, utility rooms, or attics. The design is certified by CSA International.

Additional Benefits

Direct Spark Ignition and Remote Sensor
The direct spark ignition is an efficient method of gas ignition while the remote sensor monitors the flame.

Furnace Control
This solid state integrated furnace control is the “brain” of this dependable furnace controlling the blower and inducer motors for heating capacity and efficiency.

Patented Heat Exchanger
Extremely compact the heat exchanger provides a faster, more efficient transfer of heat. The aluminized and stainless steel construction is so reliable its backed with a 20-year limited warranty.

Induced Draft Blower
It works specifically with the heat exchanger. The blower pulls hot combustion gases through the exchanger and vents them outdoors.

In-Shot Burners
Regulates the air/gas mixture.

Blower Motor
An easy slide out blower motor for easy access. The blower quietly circulates air around the heat exchanger, where its heated to comfortably warm your home.

Friedrich The Kühl Difference

Air Conditioning, Heating

See the Kühl Difference

See The Kuhl Difference

  1. Heavy 20-gauge steel, scratch-resistant cabinet.
  2. Solid sleeve top protects the fan from debris.
  3. Unique aluminum rear grille protects the unit from damage and vandalism.
  4. Control panel lockout option preserves settings.
  5. Consistent sleeve dimensions for 20+ years of easy replacement.

Introducing Kühl

The only commercial grade room air conditioner tough enough for the most demanding applications. Everything about these category-leading units is designed for maximum quality, ease and control. From the 20-gauge steel cabinet and fully enclosed fan motors to the 7-day programmability and LCD control lockout, Kühl’s advanced design was created with industrial applications in mind. The line has cooling-only models and models with heat (heat pump or electric heat) in a full range of capacities. And, Kühl is available in ENERGY STAR®-qualified models. Our Sizing Guide and Specifications by Model will help you select the appropriate cooling and/or heating capacity.

 

Maxitrol Gas Pressure Regulators

Heating, Plumbing

Lever Acting Design

Maxitrol Lever Acting Design Regulators

325 Series Regulators

The 325 series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.

Models & Pipe Sizes

Type Model/Pipe Size PSI
Appliance 325-3 (3/8″, 1/2″)325-5A (1/2″, 3/4″, 1″)

325-7 (1 1/4″, 1 1/2″)

 10
Line Regulator 325-3L (3/8″, 1/2″)325-5AL (1/2″, 3/4″, 1″)

325-7L (1 1/4″, 1 1/2″)

 2
Line Regulator with OPD 325-3L47 (3/8″, 1/2″)325-3L48 (1/2″)

325-5AL48 (1/2″, 3/4″)

325-5AL600 (3/4″, 1″)

325-7L210D (1 1/4″, 1 1/2″)

 5

Gases

Suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.

Fluke CO-220 Carbon Monoxide Meter

Tools & Instruments

Fluke CO-220 Carbon Monoxide Mete

Quickly and accurately measure CO levels with easy-to-use compact meter

The Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate
measurements of CO levels with a single compact instrument. Featuring the newest
generation of electrochemical sensors, the CO-220 responds very quickly to ambient
changes in carbon monoxide concentration without the use of a pump. The CO-220 is
the perfect instrument for technicians and other professionals who need to measure
CO levels within spaces such as industrial environments, commercial buildings, or
residential dwellings where accumulation of combustion gas is possible.

CO-220 product highlights include:

  • Rugged case and electronics.
  • Large LCD displays CO levels from 0 to 1000 ppm.
  • Bright back-light allows easy screen viewing under dim lighting conditions.
  • Beeper triggers with increasing frequency as CO levels rise.
  • MAX Hold function stores and displays the maximum CO level.
  • Automatic sensor zeroing and self-test sequence upon start-up.
  • CO level beeper can be silenced if desired.
  • Automatic power-off after 20 minutes extends battery life.
  • Easy to replace battery.
  • Replaceable sensor extends tool life.
  • C50 soft carrying case, battery and instruction sheet.
  • Stabilized electrochemical CO specific sensor.
  • Typical three year sensor life; one year calibration cycle.
  • Battery life typical 500 hours with alkaline battery.
General Specifications
Range: 0 to 1000 ppm
Resolution: 1 ppm
Accuracy: 5%

Fluke—The Most Trusted tools in the World

Mars Universal Nitride Igniter Kit

Heating

Universal Silicon Nitride Hot Surface Igniter Kit

Mars Universal Silcon Nitride Hot Surface Igniter Kit 68040

Mars Universal Silicon Nitride Igniter replaces over 100 silicon nitride igniter applications. The universal bracket is used in a simple series of combinations for a quick and easy installation.

Extremely low iron content of the Mars 68040 Universal Silcon Nitride Igniter very durable and reliable.

Low energy consumption makes it perfect for any 120 Volts AC application.

Mars Igniter Kit 68040

  • Highest Quality Universal Hot Surface Igniter on the Market
  • Three Year No Hassle Warranty
  • Simple Installation
  • Energy Efficient
  • Compatible With Over 100 Silicon Carbide Type Igniters

JB Valve Core Torque Tool

Tools & Instruments

New! 1/4″ valve core torque tool

JB A32008 Valve Core Torque Tool

J/B’s new valve core torque tool sets proper torque every time.

Calibrated to precise torquing requirements for core valves, the tool will no longer tighten once proper torque is achieved. Eliminates guess work which results in under or over torquing of cores.

Made in the USA

 

Locknut Plier

Tools & Instruments

Channellock 960 Locknut Plier

Channellock 960 Locknut Plier

  • Made in the USA
  • Locknut plier
  • Fits most popular UL locknut sizes (metal, PVC or plastic)
  • Thin profile for confined spaces
  • Handle lock for easy storage
  • Spring loaded handles
  • Handle shape allows both right-handed and left-handed use of the tool

Limited Time Offer Only $13.13
Mention this special at time of order.

 

Honeywell Glowfly

Heating

Honeywell Glowfly® Universal Hot Surface Igniter

Honeywell Glowfly Universal Hot Surface Igniter

Introducing Glowfly.® The first truly universal, universal hot surface igniter

Replacing a hot surface igniter can be a tricky job. Furnace designs and specifications change. Burner designs can be tight and difficult to maneuver in. Then there’s the need to carry a variety of replacement parts to match the range of furnace brands out there. Now, those challenges have one reliable solution: Glowfly® from Honeywell.

Glowfly brings it all together in one easy-to-use solution.

The toughest technology: Silicon Nitride

This second-generation material is far more durable than original OEM igniters, making it less prone to breakage when used in challenging installs.

Easier fit. Faster job.

The Glowfly’s optimized form factor enables quicker, easier service calls. Glowfly has specifically been designed for service replacement jobs.

Next-generation OEM silicon nitride quality.

Glowfly brings the latest technology and OEM quality to even the oldest furnaces.

Custom designed bracketing.

With six custom designed brackets and their seven configurations, Glowfly fits most replacement igniter applications.

The strongest warranty in the industry.

Glowfly is backed by Honeywell with a three year warranty.

  • Available as single units or in convenient six-packes.
  • Match and mount simplicity.
  • Six brackes. 110+ possibilities