Wholesale Only

Dual Port Manometer and Pressure Switch Tester

Tools & Instruments

Fieldpiece – Test Tools HVACR Pros Trust

Field Piece SDMN6 Manometer

Do More with the Pressures You Need with the New Fieldpiece Dual Port Manometer and Pressure Switch Test

  • Gas Pressure
  • Static Pressure
  • Pressure Differential
  • Test Pressure Switches
  • Easily Calibrate any Adjustable Pressure Switch
  • Great for Diagnosing Furnace Performance

Calibrate Adjustable Pressure Switches to Manufacturer Specs

Correct pressure switch operation is integral to the safety of a furnace environment. The SDMN6 is a dual-port manometer that also accurately tests pressure switches by simulating a draft with an internal pump.

The SDMN6 allows you to test pressure switches the right way.

Adjust the pump’s speed to create a negative pressure (vacuum). The red LED indicates when the switch closes. View the closing and opening pressures directly on the LCD.

The dual-port manometer measures ±60 inches of water column, high enough for gas manifold pressures.

Check building pressurization with static pressure resolution of 0.01”WC. View P1-P2 in the bottom line of the display for checking the performance of a blower.

Overview

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers’ specification, so there’s no need to carry a large variety of pressure switches on your truck.

The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60″ water column (WC) with a resolution of 0.1″ WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used: inches of water column, millimeters of water column, mBar, and PSI.

The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired.
In the static pressure mode, the unit can measure up to 2″WC with resolution to 0.010″WC, which enables a technician to measure small differences in air (or static) pressure.

Testing with the SDMN6 Dual Port Manometer and Pressure Switch Tester

Fluke VT02 Visual IR Thermometer

Tools & Instruments

Meet the VT02 Visual IR Thermometer

Fluke VT02 Visual IR Thermometer

So Advanced, We Had to Create a New Category

A troubleshooting camera with an infrared heat map.

See Beyond Temperature

The new VT02 Visual IR Thermometer bridges the gap between low cost IR thermometers and higher priced thermal imagers and allows you to see beyond temperature at a price that’s equally groundbreaking. Now, instead of the tedious tasks of taking and recording multiple, individual temperature readings, you get the complete picture with a blended visual and thermal image of your target area.

Hyper-thin pyroelectric technology leads to breakthrough affordability.

In the past, blending has been the exclusive territory of tools priced five to ten times higher, but not anymore. It’s standard with your new Fluke VT02 Visual IR Thermometer. And because the technology is so easy to use, it doesn’t require any advanced training.

The Fluke Visual IR Thermometer strikes the perfect balance between performance and affordability.

It wasn’t enough to create the features that make the VT02 in a class of its own, we set out to make it uniquely affordable.

Hyper-thin pyroelectric innovation pushes the limit of IR technology pioneering an array dense enough to create an infrared blended heat map. The result is the missing link—the ultimate in-between tool for those times when a single temperature reading isn’t enough and a high-resolution thermal image is more than you need.

Visual and thermal blending.

Until now, it hasn’t been possible to combine the convenience of a digital camera with a thermal heat map at breakthrough affordability. Unlike other technologies, the blended image eliminates guesswork and tells you the exact location of the issue.

5 Key Benefits

  1. Measure With Confidence Traditional infrared thermometers only show an average temperature of an area that doesn’t accurately identify what you are measuring. The VT02 gives you the visual image of exactly what you are measuring.
  2. Detect Issues Instantaneously Eliminate the task of taking multiple grid readings and manual temperature measurements. In one blended image, you get the complete picture and can compare readings from different dates.
  3. Pinpoint With Hot and Cold Markers A picture speaks a thousand words. The blended image of the VT02 captures a center point temperature measurement and hot and cold markers all at once with a click of a button. Pinpoint the exact location of potential problems faster and easier.
  4. Document Problems with Smartview® Software Producing a professional report with Smartview® is just as powerful as the VT02. You will be able to communicate issues or document that repairs have been fixed.
  5. Troubleshoot Efficiently Compact and intuitive, the point and shoot focus-free design of the VT02 starts finding problems right out of the box with little to no training required.

 Key Applications

  • Industrial technicians
  • HVAC/R technicians
  • Electricans
  • Automotive technicians

SmartView® Software

Document problems with SmartView® software—a brilliant way to sell yourself.

Producing a professional report with Smartview® software is just as powerful as the VT02 tool itself. You will be able to communicate the issues that you’ve detected or document repairs that have been fixed.

Visit fluke.com/toolofthetrade to learn more.

Refco Vacuum Gauge

New Products, Tools & Instruments

REF-VAC Electronic Vacuum Gauge

Refco REF-VAC Electronic Vacuum Gauge

Latest measuring instrument for continuous reading of measured values during the evacuation process out in the field as well as in the laboratory. The unit also has a practical hook for hanging and conforms to the IP classification 54.

Technical Data:

Range: 0 to 18000 Microns
Units: Pascal, Microns, mbar, Torr, mTorr, psi, inHg
Resolution: 0.1Pa / 1Micron / 0.001mbar / 0.001Torr / 1mTorr / 0.0001psi / 0.0001inHg
Sensor type: Thermocouple
Connector: 1/4 SAE = 7/16-20UNF
Operating temperature range: +32°F to 104°F
Storage temperature range: -4°F to 140°F
Max. overpressure: 500 psi
Accuracy: up to 100 Microns    +/- 10 Microns
101 – 750 Microns    +/- 45 Microns
Power supply: 3 x 1.5 V  AAA / LR03 batteries
Service life when used continually: ca. 40 hours (depending on the battery type)
Automatic shut off: After 10 min. if vacuum value greater than 18000 Microns
After 30 min. if vacuum value less than 18000 Microns
Connector Type: Standard 1/4 inch

Part No 4686712

For a very limited time, only $109.38

Refco LP-88 Infrared Thermometer

New Products, Tools & Instruments

Digital Thermometer

Refco LP88 Infrared Thermometer

The LP-88 is a rugged and practical infrared thermometer with a pistol grip, which allows for contact free temperature measurement. Various temperatures can efficiently be measured within a room. The built in dual laser pointer simplifies the measurement, by marking the measurement area with two red laser points.

Technical Data

Temperature range: -76°F – 1000°F
Operating temperature: 32°F – 122°F
Resolution: 0.1°F
Accuracy: ± 2% of display or  4°F, depending on which is greater
Battery life: 18 h
Distance Spot: 12:1
IP classification: 54
Automatic shut-off: after 15 sec. of inactivity
Emissivity: 0.95 – adjustable 0,1 to 1 in .01-steps
Weight: 0.4 lbs incl. 2 x AAA batteries

Only $66.88 For a very limited time only

Testo 552 Vacuum Gauge

Tools & Instruments

Maintenance-free, excellent accuracy

Testo 552 Vacuum Gauge

The testo 552 digital vacuum gauge for the evacuation of heat pumps, air conditioning, and refrigeration systems. The innovative testo 552 utilizes a sensor that, unlike the competition, requires no cleaning and is not affected by contamination.

Never worry about a dirty sensor causing false readings. Trust your testo 552 to always be accurate.

Features

  • Maintenance-free sensor-no more cleaning
  • Built to withstand a 6 foot drop
  • Best-in-class accuracy
  • Illuminated display
  • 2400 hours of battery life
  • Water and dust resistant (IP 42)
Vacuum measuring range 1100-0 mbar / 825080 – 0 micron
Sensor overload absolute: 6 bar / 87 psia (relative: 5 bar /72 psig)
Vacuum resolution 0.01 hPa / 10 micron
Accuracy 0 to 1.33 hPa / 0 to 1000 micron: up to +/- 10 micron Remaining range: +/- 0.3% FS
Operating temperature -4 to 122 degrees F / -20 to 50 degrees C
Battery Life 2400 hours (2 x AA), (approximately 130 with back light)
Protection class IP 42
Parameter mmHg, Torr, mbar, hPa, micron, inH@O, inHg, Pa
Measuring cycle 0.5 seconds
Sensors 1 x absolute pressure sensor
Connections 2 x 1/4″ SAE 1x MiniDin (testo 570)
Warranty Two years

Part no. 0560.5520

Cooper Atkins HACCP Manager

New Products, Refrigeration

The Future of Temperature Monitoring

Cooper Atkins HACCP Manager

HACCP Manager Handheld Model #: 37100

The HACCP Manager Handheld is a data-collecting instrument designed to simplify the collection of temperatures and the logging of all corrective actions. The Handheld can store up to 3000 readings and the database software allows for customizing up to 300 menu items to maintain accurate HACCP data. The unit accepts all Type K thermocouple probes.

  • How do you prevent a food-borne illness from putting your customers and business at risk?
  • Does the thought of maintaining a complex, paper-based food safety plan cause you anxiety?

The ATKINS state-of-the-art HACCP ManagerTM system will relieve your stress by incorporating a custom-built HACCP plan into your food business that complies with local health codes.

Addressing health safety concerns is vital in today’s foodservice industry and is, in some cases, government mandated. The planning and training involved in a traditional HACCP food safety program is laborious, costly and may be a burden to your business. The HACCP ManagerTM system is the perfect solution!

The HACCP ManagerTM system’s intuitive programming requires minimal training and will increase productivity. It has completely customizable reporting with a unique measurement stabilization feature and programmable corrective actions. The Checklist feature can assist with employee training and the visual inspection process of your entire facility. Both the firmware and software are automatically updated via the web to ensure the system is always current.

Incorporating our new HACCP ManagerTM system into your safety program will not only save you time and money, but will increase consumer confidence and ultimately improve the overall customer experience.

“The HACCP Manager is a great tool! Implementing a HACCP workflow that was completely adaptable to my needs was a real time saver. I can now focus on what I do best – serving safe and delicious food to my customers!”

HACCP ManagerTM System Includes:

  • Handheld (37100)
  • MicroNeedle Probe (50209-K)
  • Battery Charger (9382)
  • USB Cable (9383)
  • Software CD-ROM (9384)
  • Soft Carrying Pouch (9385)

The HACCP ManagerTM Software – The Power Behind The Product!

The HACCP ManagerTM software is the most important and powerful component of your HACCP Manager system. It can manage standard checklist processes, define critical control points and monitor corrective actions to ensure a detailed and solid HACCP workflow is tailored to your facility. Using the HACCP Manager system to collect temperature data makes a HACCP program much simpler and easier to implement.

HACCP Manager Menu Programming Screen

The software’s intuitive interface makes it easy to program. All of the recorded data is tamper-proof, so you can be confident that food temperatures and corrective actions are being captured properly.

HACCP Manager Database Screen

The Database tab summarizes your recorded data. A custom report can be quickly generated from this information and is easily sorted and grouped using the column headings. Reports can be exported to PDF or Excel format.

Features:

  • Transfers data easily between Handheld & PC via USB cable.
  • Stores up to 3000 temperatures and 300 menu items.
  • Sets Max/Min temperature limit indicators.
  • Stores custom menus for easy recall.
  • Exports reports to PDF and Excel format.
  • Identifies failed results quickly via color-coded alerts.
  • Updates software & firmware automatically via the web.
  • Creates custom checklists.
  • Stores 1500 checklists records (150 questions) on Handheld.

Benefits:

  • Ensures compliance with HACCP workflow and increases employee accountability.
  • Provides a systematic and accurate approach to temperature monitoring.
  • Saves time by eliminating manual data collecting & recording.
  • Ensures food is safe and improves health inspection scores via selectable Corrective Actions.
  • Adapts and customizes data based on user-defined parameters.
  • Reduces training time due to intuitive interface design.
  • Filters and sorts information at the click of a button based on user preferences.
  • Allows user to add notes to specific records.
  • Generates reports quickly and easily.

Specifications:

Handheld (37100)

  • Handheld (37100)
  • MicroNeedle Probe (50209-K)
  • Battery Charger (9382)
  • USB Cable (9383)
  • Software CD-ROM (9384)
  • Soft Carrying Pouch (9385)

MicroNeedle Probe (50209-K)

  • Temperature Range: -100° to 500°F (-73° to 260°C)
  • Response Time: 1 second (liquid)
  • Max Tip Temp: 500°F (260°C)
  • Shaft Length: 3.5” (89 mm)
  • Extended Cable Length: 48” (1.2 m)
  • One year warranty

Click here to visit Cooper Atkins website for more information.

Circuit Detective

Electrical, Tools & Instruments

Hi-Tech HTP-7P Circuit Breaker Finder

Circuit Detective

Identify AC circuit breakers, fuses, & power outlets

Plug the UL-listed transmitter into an outlet on the circuit you want to locate—up to 280 volts. Also works with the screw-in plug adapter included for light fixtures. Go to the breaker box and run the receiver’s tip over the breakers or fuse rows until the arrow illuminates and the speaker beeps. That’s the breaker or fuse you want. Includes bare-wire lead adapter to check exposed wiring too. Won’t trigger ground fault interrupters. Manual/automatic off. Foam-fitted storage case. 9-volt battery.

  • Identify AC circuit breakers, fuses, & power outlets
  • Fully Automatic
  • Digital calibration for faster, easier, more reliable identification
  • Flashing arrow indicator for easier identification
  • Smart switch with auto-off, easier operation. and longer battery life
  • 90-288VAC Operation
  • Lifetime-Limited warranty

Limited Time Offer Only $59.99

Fluke CO-220 Carbon Monoxide Meter

Tools & Instruments

Fluke CO-220 Carbon Monoxide Mete

Quickly and accurately measure CO levels with easy-to-use compact meter

The Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate
measurements of CO levels with a single compact instrument. Featuring the newest
generation of electrochemical sensors, the CO-220 responds very quickly to ambient
changes in carbon monoxide concentration without the use of a pump. The CO-220 is
the perfect instrument for technicians and other professionals who need to measure
CO levels within spaces such as industrial environments, commercial buildings, or
residential dwellings where accumulation of combustion gas is possible.

CO-220 product highlights include:

  • Rugged case and electronics.
  • Large LCD displays CO levels from 0 to 1000 ppm.
  • Bright back-light allows easy screen viewing under dim lighting conditions.
  • Beeper triggers with increasing frequency as CO levels rise.
  • MAX Hold function stores and displays the maximum CO level.
  • Automatic sensor zeroing and self-test sequence upon start-up.
  • CO level beeper can be silenced if desired.
  • Automatic power-off after 20 minutes extends battery life.
  • Easy to replace battery.
  • Replaceable sensor extends tool life.
  • C50 soft carrying case, battery and instruction sheet.
  • Stabilized electrochemical CO specific sensor.
  • Typical three year sensor life; one year calibration cycle.
  • Battery life typical 500 hours with alkaline battery.
General Specifications
Range: 0 to 1000 ppm
Resolution: 1 ppm
Accuracy: 5%

Fluke—The Most Trusted tools in the World