|
|
Fluke’s NEW T6 Electrical Testers
Fluke T6 Elecctrical Testers with FieldSense Technology
Fluke T6-600 & T6-1000
Fluke has now developed FieldSense technology that takes the open-fork, current-measuring functionality of its existing T5 Electrical Tester and adds ac voltage measurements. So now, you can use Fluke tools to take simultaneous voltage and current measurements — not just detection — without test leads.
FLUKE T6-600 and T6-1000 quick specs
- 1 to 1000 V ac or dc, 200 A (T6-1000); 600 V ac or dc, 200 A (T6-600)
- Frequency measurement 45 Hz to 66 Hz plus V+A simultaneous (T6-1000)
- 1000 V CAT III 600 V CAT IV (T6-1000); 600 V CAT III (T6-600)
- Both have Easy to read display with backlight
- Both have HOLD button temporarily freezes the reading for easy viewing
- Both accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
A Saver Way to Test Voltage
Benefits include:
- Safer voltage measurements without having to connect meters in parallel
- Faster troubleshooting by being able to measure through the fork directly around a conductor
- The ability to make voltage and current readings at the same time
Introducing the Fluke T6 Electrical Tester Video
Amprobe IRC-110 Infrared Camera
Amprobe has done it, a more affordable infrared camera!
Amprobe IRC-110 Infrared Camera
Introducing the AMPROBE IRC-110, an affordable Point and Shoot Thermal Imaging Camera for the Professional.
Point-and-shoot thermal imaging technology for the professional
The Amprobe IRC-110 thermal camera, designed for the professional, is rugged with point-and-shoot functionality to give yoiu a visual heat map image for quick and accurate identification of temperature related issues. Troubleshoot electrical connections, motors, HVAC and electrical, insulation leaks around buildings to identify potential energy savings.
Features
- Center Point temperature measurement
- Auto off function
- Selectable fahrenheit and celsius
- Intuitive joystick navigation makes it easy to use
- Hot and Cold markers instantly identify hottest and coldest spots
- Three selectable color palettes
Circuit Detective
Hi-Tech HTP-7P Circuit Breaker Finder
Identify AC circuit breakers, fuses, & power outlets
Plug the UL-listed transmitter into an outlet on the circuit you want to locate—up to 280 volts. Also works with the screw-in plug adapter included for light fixtures. Go to the breaker box and run the receiver’s tip over the breakers or fuse rows until the arrow illuminates and the speaker beeps. That’s the breaker or fuse you want. Includes bare-wire lead adapter to check exposed wiring too. Won’t trigger ground fault interrupters. Manual/automatic off. Foam-fitted storage case. 9-volt battery.
- Identify AC circuit breakers, fuses, & power outlets
- Fully Automatic
- Digital calibration for faster, easier, more reliable identification
- Flashing arrow indicator for easier identification
- Smart switch with auto-off, easier operation. and longer battery life
- 90-288VAC Operation
- Lifetime-Limited warranty
Limited Time Offer Only $59.99
Grasslin DTAV40 Defrost Timer
Grasslin DTAV40 Defrost Timer
The Grasslin DTAV40 Series Auto Voltage Defrost Timer is applicable to air defrost (compressor shutdown) and electric or hot gas defrost systems where the defrost is terminated by the timer. If the coil is frost free, the timers can also be terminated by temperature or pressure switches before the programmed defrost termination time has been reached. The time termination functions as a fail-safe and terminates the defrost cycle if the temperature or pressure switch fails to do so.
- DTAV40 replaces over 40 competitive models
- Auto-Voltage automatically adjusts for 120-240 VAC
- Mounts in existing enclosures, no tools required
- Box lug terminals
- Defrost times programmable in 15-minute intervals with captive trippers
- UL Type 3R outdoor enclosure (DTAV40IM – UL Type 1 Metallic)
- 40 Amp, 2 HP Rating
- Moisture resistant conformal coated board
- LED indicators for defrost and refrigeration cycles
- Defrost cycles are programmed independently
- “Real-time” clock face for quick, easy and accurate setting
- Min ON/OFF time: 15 minutes
- Max ON/OFF time: 23 hours, 45 minutes
Intermatic AG3000 Surge Protector
Invest in Peace of Mind with the AG3000!
Intermatic AG Series Surge Protective Device
Power surges are the silent killer for home appliances and HVAC equipment. Most homeowners protect their electronics, but leave more valued equipment unsecured. Surges can wipe out equipment and leave you searching for answers. Search no more. The easy-to-install AG3000 surge protector is the perfect add-on for HVAC equipment. It features unmatched surge protection ratings and a 3-year, $7,500 connected equipment warranty.
Overview:
- 120/240 VAC Single Split Phase SPD for use on a variety of HVAC Equipment
- Green LED:Protection Indicator
- Unmatched Surge Protection Ratings
- Only HVAC Surge Protector that is both Type 1 and Type 2 compatible
- Meets all UL1449 3rd Edition Standards
- Type 4x Enclosure
- 18 in. 10 Gauge Leads
- 1/2 inch x 20 Threaded Nipple (weatherproof and UV resistant)
- All Intermatic Surge Protective devices utilize state-of-the-art TPMOV® surge technology
- 3-Year Product Warranty
- $7,500 Connected Warranty